Maxim推出MAX20021/MAX20022电源管理IC2013

摘要：  MAX20021 / MAX20022的电源管理ic(PMICs)集成四个低压、高效、降压直流-直流转换器。每四个输出是工厂或电阻器可编程在1.0 v至4.0 v和可以提供高达1.0一个的电流。操作的PMICs从3.0 v至5.5 v，使它们适合汽车荷载点和职位规定应用程序。

关键字：  电源管理ic，汽车荷载点，

MAX20021 / MAX20022的电源管理ic(PMICs)集成四个低压、高效、降压直流-直流转换器。每四个输出是工厂或电阻器可编程在1.0 v至4.0 v和可以提供高达1.0一个的电流。操作的PMICs从3.0 v至5.5 v，使它们适合汽车荷载点和职位规定应用程序。

The MAX20021/MAX20022 power-management ICs (PMICs) integrate four low-voltage， high-efficiency， step-down DC-DC converters. Each of the four outputs is factory or resistor programmable between 1.0V to 4.0V and can deliver up to 1.0A of current. The PMICs operate from 3.0V to 5.5V， making them ideal for automotive point-of-load and post-regulation applications.

The PMICs feature fixed-frequency PWM-mode operation with a switching frequency of 2.2MHz or 3.2MHz. High-frequency operation allows for an all-ceramic capacitor design and small-size external components. The low-resistance on-chip switches ensure high efficiency at heavy loads while minimizing critical inductances， making the layout a much simpler task with respect to discrete solutions. Internal current sensing and loop compensation reduce board space and system cost.

The PMICs offer a spread-spectrum option to reduce radiated emissions. Two of the four buck converters operate 180° out-of-phase with the internal clock. This feature reduces the necessary input capacitance and improves EMI as well. All four buck converters operate in constant-PWM mode outside the AM band. The PMICs offer a SYNC input to synchronize to an external clock.

The PMICs provide individual enable inputs and power-good/reset outputs， as well as factory-programmable active-low RESET times.

The PMICs offer several important protection features including: input overvoltage protection， input undervoltage monitoring， input undervoltage lockout， cycle-by-cycle current limiting， and overtemperature shutdown. The input undervoltage monitor indicates a brownout condition by driving PG_ low when the input falls below the UVM threshold.

The MAX20021/MAX20022 PMICs are available in a 28-pin TQFN package with an exposed pad and are specified for operation over the -40°C to +125°C automotive temperature range.

Key Features

Quad Step-Down DC-DC Converters with Integrated FETs Operate from 3.0V to 5.5V Supply Voltage 1.0V to 4.0V Fixed or Adjustable Output Voltage 2.2MHz or 3.2MHz Switching Frequency Two Output Current Configurations Two 1.0A Outputs and Two 500mA Outputs (MAX20021) Four 1.0A Outputs (MAX20022) Designed to Improve Automotive EMI Performance Forced-PWM Operation Two Channels 180º Out-of-Phase SYNC Input Spread-Spectrum Option Soft-Start and Supply Sequencing Reduces Inrush Current Individual Enable Inputs and Power-Good Outputs to Simplify Sequencing OV/UV Input-Voltage Monitoring Overtemperature and Short-Circuit Protection 28-Pin (5mm × 5mm × 0.8mm) TQFN-EP Package -40°C to +125°C Operating Temperature Range